Epson AcuLaser C1900 - Page 225

Functions of the Control Panel 225
7
7
7
7
7
7
7
7
7
7
7
7
*** Depending on which font is selected.
Note:
If you normally use the HP LaserJet 4 printer driver when printing, you
should change settings using this driver whenever you can. Printer
driver settings always override the LJ4 Menu options.
Font Source
Sets the default font source.
Font Number
Sets the default font number for the default font source. The
available number depends on the settings you made.
Pitch
Specifies the default font pitch if the font is scalable and of
fixed-pitch. You can select from 0.44 to 99.99 cpi (characters per
inch), in 0.01-cpi increments. This item may not appear
depending on the Font Source or Font Number settings.
Height
Specifies the default font height if the font is scalable and
proportional. You can select from 4.00 to 999.75 points, in
0.25-point increments. This item may not appear depending on
the Font Source or Font Number settings.
SymSet
Selects the default symbol set. If the font you selected in Font
Source and Font Number is not available in the new SymSet
setting, the Font Source and the Font Number settings are
automatically replaced with the default value, IBM-US.