302 Troubleshooting
If a paper jam occurs at two or more locations simultaneously, the
corresponding multiple locations are displayed.
Manual Feed xxx
The manual feed mode is specified for the current print job. Make
sure the paper size indicated by xxx is loaded, then press the
Start/Stop button.
If you do not want to print this job in manual mode, press the
Cancel Job
button. The printer feeds paper from the specified
paper source.
For details on the manual feed mode, see “Manually feeding
paper”.
Mem Overflow
The printer has insufficient memory to execute the current task.
Press the
Start/Stop button on the control panel to resume
printing. Or press the Cancel Job button to cancel the print job.
Jam A Paper is jammed at the MP tray. For instructions on how to remove
jammed paper at the MP tray, see “Jam A (Cover AB)” on page 268.
Jam B Paper is jammed inside the output path cover (cover AB) or fuser
unit. For instructions on how to remove jammed paper at the output
path cover or fuser unit, see “Jam B (Cover AB)” on page 271.
Jam C Paper is jammed inside the optional lower cassette (Cover C). For
instructions on how to remove jammed paper in the optional lower
cassette, see “Jam C (Cover C)” on page 278.
Jam DM Paper is jammed inside the optional Duplex Unit’s paper path or
cover (cover DM). For instructions on how to remove jammed paper
at the Duplex Unit, see “Jam DM (Cover DM)” on page 280.
To Next Page
Loading...
