Epson AcuLaser C1900 - Page 39

Paper Handling 39
2
2
2
2
2
2
2
2
2
2
2
2
2. Pinch the paper guide and tab on the right, then slide the
paper guide to the widest position.
3. Load a stack of the desired media on the center of the tray
with the printable surface facing up. Then slide the right
paper guide against the right side of the stack to obtain a snug
fit. The left paper guide also slides toward the center. Then,
close the MP tray flap.
4. Set the MP Tray Size in the Tray Menu and the Paper Size in
the Printing Menu to match the loaded media through the
control panel.
Note:
To print on the back side of previously printed paper, use the MP tray.
The optional Duplex Unit cannot be used for this purpose.