135
1. Turn off the product and unplug the AC adapter.
2. Disconnect any connected cables.
3. Pull down on the cover open lever and open the scanner cover.
4. Use a genuine Epson cleaning kit or a soft cloth to wipe off any dust or dirt on the glass scanning
surfaces and the rollers inside the scanner cover. If the glass surface is stained with grease or some
other hard-to-remove material, use a genuine Epson cleaning kit to remove stains. Use a small
amount of cleaner on the cleaning cloth to remove the stains. Wipe off all remaining liquid.
Caution: Do not spray glass cleaner directly on the scanning surfaces. Be careful not to place too
much force on the glass.