45
If your scanned original contains staples, a paper feed error is detected and the Paper Protection feature
stops the scanning process automatically to reduce damage to the original. Remove the original from the
product, remove the staples, and try scanning again. If a paper jam still occurs, change the Paper
Protection detection level by selecting Settings > Scanner Settings > Paper Protection on the LCD
screen and selecting the desired level.
Note: The Paper Protection feature does not prevent all documents from being damaged. Paper feed
errors may not be detected depending on the paper feeding conditions.
You can also scan originals of multiple sizes by loading them one by one using the Automatic Feeding
Mode setting in Epson Scan 2.
Parent topic: Loading Originals in the Input Tray
Related topics
Scanning
Original Document Specifications
You can load original documents that meet these specifications in your product.
To Next Page
Loading...
Need help?
General
