Epson DS Series

98
Parent topic: Setting Up and Scanning to a Network Folder or FTP Server
Related tasks
Registering Contacts for Email, Network, or FTP Scanning - Control Panel
Determining the Product's IP Address
Scanning to a Network Folder or FTP Server
You can scan an image and save it to a network folder on your computer or on an FTP server using your
product's control panel. You can either enter the folder path directly on the product's control panel or
select a folder from the Contacts list.
Note: Before scanning, make sure you set a network folder or FTP server, and check that the Date/Time
and Time Difference settings are correct.
1. Place your original on the product for scanning.
2. Select the home icon, if necessary.
3. Select Network Folder/FTP.
4. Do one of the following to enter a folder location:
• To select frequently used addresses, tap the icons displayed on the screen.
• To enter the folder path directly, select Keyboard > Communication Mode, and enter the folder
path in the Location (Required) field. Select other options, as necessary.
• To select a contact from the Contacts list, select Contacts, select a contact, and then select
Close. You can tap the icon to create a new contact, or search for a folder from the Contacts
list. Enter the search keyword into the box at the top of the screen.
5. Select the Scan Settings tab, and select the desired settings.
Note: Tap the icon if you want to save your settings as a preset.
6. Tap the icon and check the scanner settings or make changes, if necessary.
7. Select the start icon to start scanning.
Parent topic: Setting Up and Scanning to a Network Folder or FTP Server
Related tasks
Creating a Shared Network Folder
Registering Contacts for Email, Network, or FTP Scanning - Control Panel