61
8. Turn off the Detect Double Feed setting on the Main Settings tab in Epson Scan 2 when scanning
special originals.
Note: If the Document Size setting on the Main Settings tab in Epson Scan 2 is set to Auto Detect,
Paper Skew is automatically selected as the Correct Document Skew setting.
9. If necessary during scanning, adjust the position of the stopper on the output tray extension to fit the
ejected originals.
Note: If thicker paper does not eject properly or falls from the output tray, push in the output tray and
allow the originals to eject freely onto the surface below the product. If the scanned images are
affected by the originals ejecting below the product, try placing the product on the edge of a table
where the ejected originals can drop freely.
Special Original Specifications
Parent topic: Loading Originals
Related references
Special Original Specifications
User Replaceable Epson Product Parts
Related topics
Scanning
Special Original Specifications
You can load photos, envelopes, or large, thick, or folded originals that meet these specifications in your
product.
Note: Photos scanned using a document scanner may not have the same color depth as the original.
Use a flatbed photo scanner to achieve the best color reproduction of photos.
To Next Page
Loading...
Need help?
General
