Epson DS Series

25
1. Select the home icon, if necessary.
2. Select Settings > Regular Cleaning Alert Settings.
3. Do the following:
• Set the Warning Alert Setting to On to receive a notification when it is time to clean inside the
scanner.
• On the Count Alert Setting screen, use the + and – icons to change the number of scans before
the notification appears.
4. Select OK to exit.
5. Select the return home icon to return to the home screen.
Parent topic: Product Basics
Changing Roller Replacement Alert Settings
You can set an alert to appear to remind you to replace the roller after a certain number of scans.
Note: This setting can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance.
1. Select the home icon, if necessary.
2. Select Settings > Roller Replacement Alert Setting.
3. Select Count Alert Setting.
4. Use the + and – icons to change the number of scans (1,000 to 200,000) before the notification
appears.
5. Select OK to exit.
6. Select the return home icon to return to the home screen.
Parent topic: Product Basics
Setting a Password and Locking the Control Panel
You can set an administrator password to lock the following settings and prevent them from being
changed: