153
Resetting the Roller Counter
When you replace the product's rollers, reset the roller counter so you know when you may need to
replace the rollers again.
1. Select the home icon, if necessary.
2. Do one of the following:
• Select Scanner Maintenance > Roller Replacement > Reset the Number of Scans > Number
of Scans After Replacing Roller > Yes.
• Select Settings > Device Information > Reset the Number of Scans > Number of Scans After
Replacing Roller > Yes.
Note: You can also reset the roller counter from your computer using the Epson Scan 2 Utility.
Select the Counter tab and click Reset.
Parent topic: Replacing the Rollers
Related tasks
Checking the Roller Counter
Changing Roller Replacement Alert Settings
Transporting Your Product
If you need to ship your product, transport it a long distance, or store it for an extended period, prepare it
for transportation as described here.
1. Turn off the product and unplug the AC adapter.
2. Disconnect any connected cables.
To Next Page
Loading...
