21
4. Select the scanning option you want to register as a preset.
Note: For some scanning options, it is best to configure the destination information (such as email
contacts or network folders) before registering the preset. You can still configure the destination
information while registering the preset, but if it is configured beforehand, you can simply make your
selections from the existing list.
Note: For the Scan to Computer option, select the computer on which Document Capture Pro is
installed, and then select a registered job. This option is available only for a computer connected
over a network.
5. Tap the Register icon to register the preset.
6. Enter the following settings:
• Name: Enter a name for the preset.
• Set Icon: Select an icon and background color for the preset.
• Quick Send Setting: Select On to start scanning immediately when the preset is selected.
Note: If you are using Document Capture Pro Server, the Quick Send preset takes priority over
other software settings.
• Contents: Change scan settings as necessary.
7. Select OK to save the preset settings.
8. Select the return home icon to return to the home screen.
Parent topic: Customizing the Control Panel Display
To Next Page
Loading...
