Items that Can only Be Set with a Web Browser
• SNMP Community Name (up to 32 single-byte alphanumeric characters)
• Monitor Password (up to 16 single-byte alphanumeric characters)
Displaying the Web Control Screen
Use the following procedure to display the Web Control screen.
Make sure the computer and projector are connected to the network. Use
Advanced when connecting via a Wireless LAN.
a
If your Web browser is set up to connect via a proxy server, the Web
Control screen cannot be displayed. To display Web Control, you need
to make settings so that a proxy server is not used for a connection.
a
Start a Web browser on the computer.
b
Enter the IP address of the projector in the address input box of
the Web browser, and press the Enter key on the computer's
keyboard.
The Web Control screen is displayed.
When Web Control Password is set from the Configuration menu,
the password entry screen is displayed.
c
Enter the User ID and Password, and then press the Enter key on
your computer's keyboard.
The User ID is "EPSONWEB".
The default password is "admin".
When the correct user ID and password are entered, the Web
control screen is displayed.
a
• Enter the user ID even if the password setting is disabled. The
user ID cannot be changed.
• You can change the password in Network menu from the
Configuration menu.
s
Network - Basic - Web Control Password p.127
Displaying the Web Remote Screen
The Web Remote function allows you to perform projector remote control
operations with a Web browser.
a
Display the Web Control screen.
b
Click Web Remote.
c
The Web Remote screen is displayed.
Monitoring and Controlling
106
To Next Page
Loading...
Need help?
General
