f
Attach the lamp cover.
Attention
• Make sure you install the lamp securely. If the lamp cover is removed, the
power turns off automatically as a safety precaution. If the lamp or the lamp
cover is not installed correctly, the power does not turn on.
• This product includes a lamp component that contains mercury (Hg). Please
consult your local regulations regarding disposal or recycling. Do not dispose
of it with normal waste.
Resetting the Lamp Hours
The projector records how long the lamp is on and a message and indicator
notify you when it is time to replace the lamp. After replacing the lamp,
make sure you reset the lamp hours from the Configuration menu.
s "Reset Menu" p.137
a
Only reset the lamp hours after the lamp has been replaced. Otherwise,
the lamp replacement period will not be indicated correctly.
Replacing the Air Filter
Air Filter Replacement Period
If the message is displayed frequently even though the air filter has been
cleaned, replace the air filter.
How to Replace the Air Filter
The air filter can be replaced even when the projector is suspended from a
wall or ceiling.
a
After you turn off the projector's power and the confirmation
buzzer beeps twice, disconnect the power cord.
Replacing Consumables
169
To Next Page
Loading...
Need help?
General
