f
Select the zoom factor from the zoom setting screen.
g
When the message "Save this image as the User's Logo?" is
displayed, select Yes.
The image is saved. After the image has been saved, the message
"Completed." is displayed.
a
When a User's Logo is saved, the previous User's Logo is
erased.
Saving User Pattern
There are four types of patterns registered to the projector, such as ruled
lines and grid patterns.
s Settings - Pattern - Pattern Type p.122
You can also save the image that is currently being projected as a User
Pattern.
a
When a User Pattern is saved, the previous User Pattern is erased.
a
Project the image you want to use as the User Pattern, and then
press the [Menu] button.
s "Using the Configuration Menu" p.116
Using Remote Control Using the Control Panel
b
Select Pattern from Settings.
c
Select User Pattern.
Projection Functions
99
To Next Page
Loading...
Need help?
General
