Name Function
A
[Power] button
[t]
Turns the projector power on or off.
s "Getting Ready to Project" p.44
B
[Computer] button
Each time the button is pressed, it cycles through the
following images:
• Computer1 port
• Computer2 port
C
[Video] button
Each time the button is pressed, it cycles through the
following images:
• S-Video port
• Video port
• HDMI1/MHL port
• HDMI2 port
D
[Freeze] button
Pauses or resumes image playback.
s "Freezing the Image (Freeze)" p.93
E
[A/V Mute] button
Turns the video and audio on or off.
s "Hiding the Image and Sound Temporarily (A/V
Mute)" p.93
Name Function
F
[Page] buttons
[Up] [Down]
Changes pages in files such as PowerPoint files when using
the following projection methods.
• When using the Wireless Mouse function
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.95
• When using USB Display
s "Projecting with USB Display" p.47
• When connecting to a network
When projecting images using PC Free, pressing these
buttons displays the previous/next image file.
G
[Source Search]
button
Switches to the image from the input port where video
signals are being input.
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.45
H
[LAN] button
Switches to the image from the network connected device.
s "Switching to the Target Image Using the Remote
Control" p.46
I
[USB] button
Each time the button is pressed, it cycles through the
following images:
• USB Display
• Images from the device connected to the USB-A port
s "Switching to the Target Image Using the Remote
Control" p.46
J
[Volume] buttons
[a][b]
[a] Decreases the volume.
[b] Increases the volume.
s "Adjusting the Volume" p.57
Using the Mail Notification Function to Report
Problems
When you set Mail Notification, notification messages are sent to the preset
email addresses when a problem or warning occurs with a projector. This
Monitoring and Controlling
107
To Next Page
Loading...
Need help?
General
