Connecting Image Sources
To project images from DVD players or VHS video and so on, connect to the projector using one of the following methods.
A
When using a commercially available video cable
Connect the video output port on the image source to the projector's Video port using a commercially available video cable.
You can output audio from the projector's speaker by connecting the audio output port on the image source to the projector's Audio port using a commercially available audio
cable.
B
When using a commercially available S-video cable
Connect the video output port on the image source to the projector's S-Video port using a commercially available video cable.
You can output audio from the projector's speaker by connecting the audio output port on the image source to the projector's Audio port using a commercially available audio
cable.
CD
When using the optional component video cable
s "Optional Accessories and Consumables" p.174
Connect the component output port on the image source to the projector's Computer1 or Computer2 port.
You can output audio from the projector's speaker by connecting the image source's audio output port to the projector's Audio1 or Audio2 port using a commercially available
audio cable.
E
When using a commercially available HDMI cable
Connect the image source's HDMI port to the projector's HDMI1/MHL or HDMI2 port.
Audio from the image source is output from the projector with the projected image.
Connecting Equipment
31
To Next Page
Loading...
Need help?
General
