Alphabet ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
Symbols ! # $ % & ' ( ) + - . / < = > ? @ ^ _ ` { | } ~
a
• Colons (:) cannot be entered on the Network menu.
• Except for the SSID, spaces cannot be entered on the Network
menu.
• Some symbols (" * , ; [ \ ] ^) cannot be entered using the software
keyboard. Use your Web browser to enter the text.
s "Changing Settings Using a Web Browser (Web Control)" p.105
Basic Menu
Sub-menu Function
Projector Name
Displays the projector name used to identify the projector when
connected to a network.
When editing, you can enter up to 16 single-byte alphanumeric
characters. The following symbols cannot be used: " * + , / ; < = > ?
[ \ ] ` |
Sub-menu Function
PJLink Password
Set a password to use when you access the projector using
compatible PJLink software.
You can enter up to 32 single-byte alphanumeric characters
(symbols cannot be used).
Web Control
Password
Set a password to use when making settings and controlling the
projector using Web Control. You can enter up to eight single-
byte alphanumeric characters (* cannot be used). The default
password is "admin".
Web Control is a computer function that allows you to set up and
control the projector by using the Web browser on a computer
connected on a Network.
s "Changing Settings Using a Web Browser (Web Control)"
p.105
Projector Key‐
word
When set to On, you have to enter the keyword when you try to
connect the projector to a computer via a network. As a result,
you can prevent presentations from being interrupted by
connections from other computers.
Normally this should be set to On.
s EasyMP Network Projection Operation Guide
s EasyMP Multi PC Projection Operation Guide
List of Functions
129
To Next Page
Loading...
