PC Interactive
Set when you want to operate a computer from the projected screen.
Sub-menu Function
Pen Operation
Mode
Set the operation mode and the number of users for the
interactive pen.
Two Users/Mouse (default)/One User/Mouse: Allows you to
perform mouse operations using the interactive pen.
One User/Pen: The pen input and Ink features are available in
Windows 8.1, Windows 8, Windows 7, and Windows Vista.
Enable Right
Click
(Only available when Pen Operation Mode is set to Two
Users/Mouse or One User/Mouse.)
When this is set to On, a long press of the pen acts as a right click.
Advanced
• Pen Tip Button: Allows you to set operations for the pen tip of
the interactive pen. The default setting is Left Click.
• Auto Adjust Pen Area: When this is set to On (default), the
pen area is automatically adjusted as the resolution for the
connected computer changes. Set to Off if you do not want to
automatically adjust the pen area that has been manually
adjusted.
• Manual Adj. Pen Area: Adjusts the pen area manually.
Network Menu
When Network Protection is set to On in Password Protection, a message
is displayed and the network settings cannot be changed. Set Network
Protection to Off and then configure the network.
s "Setting Password Protection" p.101
Sub-menu Function
Net. Info. - Wire‐
less LAN
Displays the following network setting status information.
• Connection Mode
• Wireless LAN Sys.
• Antenna Level
• Projector Name
• SSID
• DHCP
• IP Address
• Subnet Mask
• Gateway Address
• MAC Address
• Region Code
*
Net. Info. -
Wired LAN
Displays the following network setting status information.
• Projector Name
• DHCP
• IP Address
• Subnet Mask
• Gateway Address
• MAC Address
List of Functions
127
To Next Page
Loading...
