Wireless LAN Menu
Sub-menu Function
Wireless LAN
Power
Turn On when connecting the projector to the computer over
wireless LAN.
If you do not want to connect via wireless LAN, turn it Off to
prevent unauthorized access by others.
This is set to On by default.
Connection
Mode
Set the connection mode to use when connecting the projector
and a computer via a wireless LAN.
If you select Quick (default), a small network is created
automatically by the projector and computer. Used in
combination with EasyMP Network Projection. When SSID
Auto Setting is set to On, the projector becomes an easy access
point. When set to Off, the network is created in
Ad hoc
mode
g
.
If you select Advanced, the connection is established in
infrastructure mode
g
through the access point installed.
See the following manual for details on Connection Mode.
s EasyMP Network Projection Operation Guide
s EasyMP Multi PC Projection Operation Guide
Sub-menu Function
Channel
(This can only be set if Connection Mode is set to Quick.)
Select the frequency band used by the wireless LAN from 1ch,
6ch, or 11ch.
This is set to 11ch by default.
SSID Auto Set‐
ting
(This can only be set if Connection Mode is set to Quick.)
Set to On to speed up the projector search.
Set to Off when connecting to multiple projectors at the same
time.
This is set to On by default.
SSID
(This can be set only if SSID Auto Setting is set to Off.)
Enter an
SSID
g
. When an SSID is provided for the wireless LAN
system in which the projector participates, enter the SSID.
You can enter up to 32 single-byte alphanumeric characters. If
the SSID is left blank or set to ANY, an ANY connection (selects a
connection from local access points without specifying an SSID)
is established.
List of Functions
130
To Next Page
Loading...
Need help?
General
