Epson ELPWP20 User Manual

•
Fo
r infrastructure mode, set the Simple AP setting to O and go to
next step.
f
Select the Wireless LAN menu and press the Enter button.
e base unit starts searching for access points.
You can also search for access points using the Se
arch Access Point
setting manually.
g
Select the access point you want to connect to.
If you need to assign the SSID manually, select SSID
to enter the
SSID.
h
Assign the IP settings for your network as necessary.
•
If y
our network assigns addresses automatically, select IP Settings to set
the DHCP setting to On.
•
If you must set addresses manually, select IP Settings to set the DHCP
setting to O, and then enter the base unit's IP Address, Subnet Mask,
and Gateway Address as necessary.
i
To prevent the IP address from being displayed on the network
info
rmation screen, set the IP Address Display setting to O.
j
Select the Network Projection menu and press the Enter button.
k
Turn on the Base U
nit Keyword setting if you want to prevent access to
the base unit by anyone not in the room with it.
When you turn on this setting, you must enter a displayed,
randomized keyword from a computer using Epson iProjection to
access the base unit and share the current screen.
Sharing Screens Using Epson iProjection (Wireless Connection)
48

Epson ELPWP20 Specifications

General

Brand	Epson
Model	ELPWP20
Category	Projector Accessories
Language	English