5-3
EMP-TW1000
SEIKO EPSON Revision:A
When the video source is S-Video or Video, the following screen (Page 1) is displayed.
Error Log Window (Page 2)
While the AS menu is displayed, the Error Log Window can be displayed by pressing the
[Right] button. To go back to the AS menu, press the [Left] button.
• The last 5 error logs are displayed (the latest on top). None is displayed if there’s no error.
• In the case of the above window, the latest error is “Cinema Filter Error” (TOT: 5 hours 36
minutes 27 seconds, LOT: 9 hours 46 minutes 57 seconds, POT: 0 hours 2 minutes 23 sec-
onds, PJ’s status: Lamp ON).
• The 2nd latest error is “Fan Error” (TOT: 5 hours 34 minutes 4 seconds, LOT: 8 hours 35
seconds 34 minutes, POT: 0 hours 0 minutes 1 second, PJ’s status: Warming up).
Item Contents
Representation
Error Log
CD Error Code Two alphabets
TOT Total Operation Time h: 5-digit number (00000-65535)
Over 65535: “65535” (Not cleared to “0.”)
m: 2-digit number (00-59)
s : 2-digit number (00-59)
LOT Lamp Operation Time
POT Time after Lamp is ON
ST PJ (Projector)’s status
Acquired data of PWR? of
the ESC/VP21 command
XXXXXXXXXXXXXX
To Next Page
Loading...
Need help?
General
