Epson EMP-TW1000 User Manual

5-6
EMP-TW1000
SEIKO EPSON Revision:A
3. When DIP-SW setting is changed, turn off the power button and cool down the projector as
usual. After the cool down is complete, the new setting is effective.
SW4 0 reserved - - -
1 Setup level 0 0: 0 %, 1: 7.5 % Varies by destination
2 Lamp noise analysis mode 0
0: disabled
1: enabled
-
3reserved - - -
4reserved - - -
5reserved - - -
6reserved - - -
7reserved - - -
SW6
0
Dot defect detection
pattern
0
0: disabled
(no display)
1: enabled
(displays)
-
1reserved - - -
2reserved - - -
3
Power button at button-
lock
1
0: disabled
1: enabled
-
4reserved - - -
5reserved - - -
6reserved - - -
7reserved - - -
DIP-SW
No
BIT Function
Default
Setting
Setting Value Note

Epson EMP-TW1000 Specifications

General

Brand	Epson
Model	EMP-TW1000
Category	Projector
Language	English