Epson FX-2180 - Chapter 2: Printing on Continuous Paper

FX-2180 Service Manual Disassembly and Assembly
Rev. A
4-
5
4.2.1 Preparation for Disassembly the Printer
1. Remove the following belonging parts from the printer:
Front edge guide assembly, Front cover, Bottom cover,
Rear edge guide assembly, Printer cover, Paper eject assembly,
Front / rear tractor assembly, Ribbon cartridge
CAUTION
Remove the paper eject cover and the front / rear
tractor assembly by pushing to release the hooks
at both sides. When remount them, be sure the
hooks on the projecting parts.
Front Edge G uide A ssem bly
Front C over
Front Tractor U nit
R ear Tractor U nit
Paper Eject A ssem bly
R ear E dge G uide Assem bly
Printer Cover
Knob
Figure 4-2. Belonging parts Disassembly