Epson LQ 1050 - B/W Dot-matrix Printer - Printer Mechanism Removal

REV.-A
4.2.5.1
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Printer Mechanism Removal
Remove the upper case (Refer to Section 4.2. 1.).
Remove the push tractor unit (Refer to Section 4.2.3.).
Disconnect connectors CN4, CN5,
CN6, CN7, CN8, CN9, and CN 10 from the pEG)( board (Refer
to Figure 4-1 O.).
For the FX-850 remove the three screws, or for the FX-1 050 remove the four screws, CPS(0)
(3 X 6), which attach the ground plates to base frame.
For the
FX-850 remove the four screws, or for the FX-105O remove the five screws, CBB (0)
(4 X 25), securing the printer mechanism to the lower case.
CPS(0) (3X 6)
CBB(P) (4X 25)
Figure 4-15. Printer Mechanism Removal
4-13