REV.-A
1.11.4 PGPNL Board (Control Panel)
There are 11
LEDs,
seven switches, and a buzzer on the control panel. Among these, seven
LEDs
and
three switches are for the panel setting function
(SelecType).
Font, character pitch, and condensed mode
can be selected directly using these switches. Settings set using the SelecType mode are stored in the
memory and are set on the panel when the printer hardware is initialized.
Normally, the SelecType
function is valid when not printing. The printers have various other functions that can be selected from
the control panel.
Figure 1-16 shows the control panel.
Figure 1-16. Control Panel
Switches
ON LINE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
This button controls the printer’s on line/off line status.
When the printer is on
line, ON LINE light is on and the
printer can receive and print data from the computer.
When this lamp is flickering, the micro adjustment
function can be used.
FORM FEED
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
When the printer is off line, press this button to eject a
single sheet of paper or to advance continuous paper to
the top of the next page.
LINE FEED
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
When the printer is off line, press this button to advance
the paper one line, or hold it down to advance the paper
continuously.
1-29
To Next Page
Loading...
