Epson LQ 1050 - B/W Dot-matrix Printer - Carriage Removal

REV.-A
4.2.5.14 Carriage Removal
Step 1: Remove the printer mechanism (Refer to Section 4.2.5. 1.).
Step 2: Separate the main and the base units (Refer to Section 4.3.5.1 1).
Step 3: Remove the RE (3) securing the loading lever of the plunger to paper holding lever L.
Step 4: Remove the two
HNO (4) nuts from the side frame L.
Step 5: Remove the
HNO (4) nut from the side frame R.
(a) Left Side View
‘
HNO (4
(b) Right Side View
Figure 4-40. Carriage Removal
Step
6: Spread both frames L and R apart, and remove the carriage guide shafts A and B.
4-29