REV.-A
NOTES: 1.
2.
3.
4.
Printing of labels is only available at
Labels must be fanfold.
Labels with pressure-sensitive paper
and the total thickness must be less
normal temperature.
:!,,
must be jointed by pasting along the dots or lines,
than or equal to 0.3 mm (O.
11
8“) to be printed out
under conditions that must be between 5 to 35 “C and 20 to
80Y0
RH.
Examples of labels: AVERY CONTINUOUS FORM LABELS
AVERY MINI-LINE LABELS
Lever Adjustment
See Figure 1-5 and Table 1-9.
Table 1-9. Lever Adjustment
Lever Position
Paper Thickness [mm]
Head adjustment Lever
2nd
0.06 -0.12
.fl
‘“’ward-
~
q“’’”’”
3rd
o.13
-0.17
-~
4th
0.18
5th
:::
(*’
0.26 .
Figure 1-5.
~
Head Adjustment Lever
:
.
<=,”
?
o
Positioning
NOTES: 1. When printing density becomes lighter, set the head adjustment lever one position lower.
2. When using thicker paper than shown in the above table, set the head adjustment lever
to the 6th or higher appropriate position by performing the self-test operation.
Ribbon Cartridge
See Table 1-10.
Table 1-10. Ribbon
f-
Cartridge Specification
Ribbon Model No.
#8750
#8755 (M)
Printer
FX-850
FX-1 050
Color
Black
Life
[characters]
3 million (14 dots/character)
I
Dimension
[mm]
293 X 34 X 72
468 X 34 X 78
(W) X (h) X (d)
1-8
To Next Page
Loading...
