Epson LQ 1050 - B/W Dot-matrix Printer User Manual

REV.-A
Fanfold paper
See Figure 1-4.
Printable
area
1
0.36”, 9mm
or more!
4
0.35”, 9mm
or more
i
Printabh
area
4-
10*~(16)”, 101
-
254(406)mm
P
1
*2
Printable area
J
*2
~
Max. 203.3( 350)mm ,8”(13.8”)
o
0
0
0
0
0
0
0
0
0
0
0
0
L
o ABC
J
XYZ :
o
0
0
0
0
0
---------------------------
o
0
0
0
0
T
o ABC
7
X’iz :
o
0
o“
o
0
0
0
0
0
0
0
0
0
0
NOTE: 1. Values in the parentheses apply to FX-105O.
2. 0.47”, 12 mm or more when the 101 to 242 mm (4 to 9.5”) width paper is used.
0.98”, 25 mm or more when the 254 mm (10”) width paper is used.
Figure 1-4. Fanfold Paper Printable Area
Envelopes
Size
No. 6 (166 X 92 mm), No. 10 (240 X 104 mm)
Quality
Bond paper, xerographic copier paper, airmail paper
Thickness
0.16-
0.52 mm (0.0063 -0.01 97”)
NOTE: Differences in thickness within printing area must be less than 0.25 mm (0.0098”).
Weight
121
-241 lb (45 -91 g\m2)
NOTES: 1. Envelope printing is only available at normal temperature.
2. Keep the longer side of the envelope horizontally at setting.
3. Set the left of No. 6 envelope at the setting mark of the sheet guide.
Label
Size
2 1/2 X 15/16”, 4 X 15/16”, 4 X 1 7/16”
Thickness
O.19 mm (0.0075) max.
NOTE: Thickness excluding the base paper must be less than or equal to 0.12 mm (0.0075”).
1-7

Epson LQ 1050 - B/W Dot-matrix Printer Specifications

General

Brand	Epson
Model	LQ 1050 - B/W Dot-matrix Printer
Category	Printer
Language	English