Epson LQ 1050 - B/W Dot-matrix Printer - Paper Holding Roller Set and Paper

REV.-A
4.2.5.18 Paper Holding Roller Set and Paper Holding Levers L and R Removal
Step 1: Remove RE (3) at the outside of the paper holding lever R on the paper holding roller set.
Step 2: Remove the right and left end of the paper holding roller shaft from the paper holding levers.
Step 3: Remove the carriage motor (Refer to Section 4.2.5.4.).
~,,
Paper Holding
Lever L
Step 4:
Step 5:
Step 6:
Paper Holdi~g Roller Shaft
Carriage Motor
Figure 4-47. Paper Holding Roller Shaft Removal
Remove RE (3) at the side frame R (See Figure 4-48.).
Detach the paper holding lever R spring from the paper holding lever R.
Remove the paper holding lever R.
Paper Holding lever R Spring
Paper Holding Lever R
ler Hold
er R
Iing
UE (3)
Figure 4-48. Paper Holding Roller Lever R Removal
4-33