Epson LQ 1050 - B/W Dot-matrix Printer - Page 147

REV.-A
Step 7:
Step
8:
Step 9:
Step 10:
Step 1 1:
Remove the RE (2.3) at the plunger lever.
Remove the RE (3) at the paper holding lever L.
Remove the HNO (4) nut securing the head adjustment lever to carriage guide shaft B, then
remove head adjustment lever.
Detach the paper holding lever L spring from the paper holding lever L.
Remove the paper holding lever L.
Figure 4-49. Paper Holding Roller Lever L Removal
. . . .
~.. ,,
4-34