Epson PowerLite 5000 Service Manual

EPSON PowerLite 5000 Service Manual
2-4
2.1.2 Optical System Connections (Optical Engine)
The optical system consists of 5 blocks: the lamp inner housing, light guide unit, optical
head/prism unit, and projector lens unit, which are shown below, and the driver board.
These units are specified as the optical engine, which is one replaceable part. In addition
to these five items, the FC board is attached at the bottom of the light guide unit. The relay
board connects the FC board in the lamp inner housing to the driver board. It is
independent of the optical functions.
Lamp inner housing Light guide unit Optical head/Prism unit Projection lens unit
Mounting position
FC board
Figure 2-3

Epson PowerLite 5000 Specifications

General

Brand	Epson
Model	PowerLite 5000
Category	Projector
Language	English