Epson PowerLite 5000 - Removing the Receptor Board Assembly (FI Board;Ri Board)

EPSON PowerLite 5000 Service Manual
3-17
3.2.10 Removing the Receptor Board Assembly (FI Board / RI Board)
Prerequisite conditions: 3.2.3/3.2.4/(RI board only)
FI Board (Located on the speaker bracket)
Figure 3-20
1. Disconnect the cable connector from the FI board.
2. Remove the screw mounting the FI board to the speaker bracket.
Screw: +M3×5 F/ZB: P/N1021795
(mounting torque: 4.0 kg. cm = 3.5 lb. inch)
FI BoardScrew