Epson PowerLite 5000 - Page 84

EPSON PowerLite 5000 Service Manual
3-18
RI Board (Located on the rear cover)
Figure 3-21
1. Disconnect the cable connector from the RI board.
2. Remove the screws mounting the RI board to the speaker bracket.
Screws: +M3×5 F/ZB Bind: P/N 1033703
(mounting torque: 6.0 kg. cm = 5.2 lb. inch)
Caution:
When installing the receptor board assembly, align the hole in the board with the
boss on the frame before tightening the screws.
RI boardScrews