Epson PowerLite 5000 - Removing the Main Board

EPSON PowerLite 5000 Service Manual
3-14
3.2.8 Removing the Main Board
Prerequisite conditions: 3.2.3/3.2.4
Figure 3-16
1. Disconnect all cable connectors from the main board.
(Refer to Figure 3-10.)
Figure 3-17
15pin
12-pin 15-pin
CN602
(Speaker)
CN805
CN803
(LV Thermistor)
CN601
(Speaker)
Connects
to Right
Speaker
Connects to
CN251 on
Driver Board
Connects to
LV Thermistor
Connects to
Left Speaker
CN800
CN860
(PBS Thermistor)
CN802
(To CN361)
CN804
(Lamp
Thermistor)
CN603 CN806
(Lamp Fan)
Power Supply Unit
Thermistor
(Under Right
Speaker)
Connects to
CN Board
Connects to
AU Board
Exhaust Fan
CN600
Main Board
CN300
(To AU Board
CN361)