Epson PowerLite 5000 - Page 81

EPSON PowerLite 5000 Service Manual
3-15
(Continued from the previous page)
Screw Screws
Screws
Figure 3-18
2. Remove 5 mounting screws from the main board.
Screws: +M3×4 F/ZN Sems P/N 1021795
(mounting torque: 4.0 kg. cm = 3.5 lb. inch)
3. Grasp the main board on the left side and disconnect the connector from the driver
board.
Caution:
To avoid malfunctions caused by wire breaking or solder flaking, never apply any
mechanical stress to the main board.