Epson SC-T7000 series User Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series Revision B
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 193
Confidential
5. Remove the two screws that secure the TAKE-UP REEL MAIN BOARD Unit.
B) Black, Phillips, Bind S-tite M3x6: 2 pcs
6. Disconnect the connector from the TAKE-UP REEL MOTOR, and remove the TAKE-
UP REEL MAIN BOARD Unit.
7. Remove the C-Ring.
8. Remove the four screws that secure the Motor Mounting Plate, and remove the Motor
Mounting Plate.
C) Black, Phillips, Bind S-tite M4x8: 4 pcs
9. Remove the two gears from the Motor Mounting Plate.
10. Remove the two screws that secure the TAKE-UP REEL MOTOR, and remove the
TAKE-UP REEL MOTOR.
D) Black, Phillips, Bind S-tite with S.W & P.W. M3x6: 2 pcs
Figure 3-163. Removing the TAKE-UP REEL MAIN BOARD Unit
Figure 3-164. Removing the Motor Mounting Plate
Figure 3-165. Removing the TAKE-UP REEL MOTOR
TAKE-UP REEL
MAIN BOARD Unit
Connector
B
B
C-Ring
Motor Mounting Plate
C
TAKE-UP REEL MOTOR
Gear
Gear
D
Motor Mounting Plate

Epson SC-T7000 series Specifications

General

Brand	Epson
Model	SC-T7000 series
Category	Printer
Language	English