Epson SC-T7000 series User Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series Revision B
ADJUSTMENT Boards Related Checks and Adjustments 271
Confidential
4.14.2 RTC & USB ID Input
EXECUTION MODE
Serviceman Mode
PROCEDURE
1. Turn the printer ON in the Serviceman Mode. Turn the power ON while pressing
[Menu] + [Back] + [OK].
2. Start the Service Program and select RTC&USB ID Input.
3. Check the Date and Time displayed, and correct them if necessary.
4. Enter the 10-digit serial number of the printer to generate a USB ID.
5. Click [Write USB ID] to write RTC to the NVRAM on the MAIN BOARD.
6. Click [Finish].
7. Turn the printer OFF.
Figure 4-70. [RTC&USB ID Input] Screen
C A U T I O N
If the printer is turned OFF and back ON after changing the USB
ID, the computer (Windows) detects the USB port as a new port
and automatically copies the printer driver as xxxx (copy x). If you
need to perform another adjustment using this tool, select the
"copy x" driver.

Epson SC-T7000 series Specifications

General

Brand	Epson
Model	SC-T7000 series
Category	Printer
Language	English