Epson SC-T7000 series - Initial Ink Charge Flag

SC-T7000 series/SC-T5000 series/SC-T3000 series Revision B
ADJUSTMENT Initial Ink Charge Flag 233
Confidential
4.9 Initial Ink Charge Flag
This function allows you to set whether or not to execute the Initial Charge when the
printer is turned ON. To execute the Initial Charge, set the flag to ON.
PROCEDURE
1. Turn the printer ON in the Serviceman Mode. Turn the power ON while pressing
[Menu] + [Back] + [OK].
2. Start the Service Program and select Initial Ink Charge Flag.
3. Select ON or OFF and click [Run].
4. Turn the printer OFF.
Figure 4-13. [Initial Ink Charge Flag] Screen