SC-T7000 series/SC-T5000 series/SC-T3000 series Revision B
ADJUSTMENT Media Feed Related Checks and Adjustments 265
Confidential
4.13.3 Media Feed Auto Adjustment
PAPER USED
 Type: Premium Glossy Photo Paper (250)
 Size: 16 inches or longer
EXECUTION MODE
Normal mode
PROCEDURE
1. Turn the printer ON.
2. Load the paper into the printer.
3. Start the Service Program and select Media Feed Auto Adjustment.
4. Click [Run].
The adjustment pattern will be printed.
5. After the pattern is printed, the printer will automatically scan the pattern and carry
out the adjustment (no manual adjustment is needed).
6. Click [Finish].
7. Turn the printer OFF to finish the adjustment.
Figure 4-62. [Media Feed Auto Adjustment] Screen
Figure 4-63. Adjustment Pattern
C H E C K
P O I N T
Required time: about 4 minutes