Epson SC-T7000 series User Manual

SC-T7000 series/SC-T5000 series/SC-T3000 series Revision B
TROUBLE SHOOTING Remedies for Service Call Error 56
Confidential
1FC2
CSIC control
CSIC error
CSIC control error
---
1. Replace the IC HOLDER. (See
P.148)
2. Replace the MAIN BOARD.
(See P.111)
1FC3
CSIC control
CSIC error
CSIC control error
---
1. Replace the IC HOLDER. (See
P.148)
2. Replace the MAIN BOARD.
(See P.111)
1FE0
Storage control
Controlled domain full
error
TBD TBD TBD
1FE1
Storage control Invalid lock TBD TBD TBD
1FE2
Storage control Device access error TBD TBD TBD
1FE3
Storage control Missing device TBD TBD TBD
2000
Memory NVRAM error NVRAM erase or write error has occurred.
---
Replace the MAIN BOARD. (See
P.111)
2002
Memory SDRAM error
Writing to the SDRAM was attempted, but nothing
could be written to it.
---
Replace the MAIN BOARD. (See
P.111)
2003
Memory
FLASH BOOT SUM
CHECK error
 Installing the firmware has failed.
 The Flash ROM is out of order.
---
1. Re-install the firmware. (Page
229)
2. Replace the MAIN BOARD.
(See P.111)
2008
Memory
Wrong FLASH device
error
TBD TBD TBD
200A
Memory F/W load error Reading/decompressing the firmware has failed.
---
1. Re-install the firmware. (Page
229)
2. Replace the MAIN BOARD.
(See P.111)
200D
System
System interrupt
watchdog time-out error
A system failure such as CPU failure, or defective
cash has occurred.
---
Replace the MAIN BOARD. (See
P.111)
3000
AC shut-off AC shut-off
The AC power has been shut off due to a power
failure, unplugged, PSH BOARD failure, or MAIN
BOARD failure or the like.
Check if the Power cable is correctly connected.
1. Replace the PSH BOARD. (See
P.118)
2. Replace the MAIN BOARD.
(See P.111)
Table 2-2. Service Call Error
Code Category Error Name Cause Check Item Remedy

Epson SC-T7000 series Specifications

General

Brand	Epson
Model	SC-T7000 series
Category	Printer
Language	English