The printer operation check prints well, but nothing prints
from within an application program.
Cause What to do
Your printer is not selected in
your software.
Select your printer in the printer setup
section of your software.
The interface cable does not
meet both the printer and
computer requirements.
Use a printer cable that meets the
requirements shown under “System
Requirements“ on page 1-4.
Your computer is not 100%
IBM
®
AT compatible.
Select
Use Print Manager for this port
in the Queue Setup window. To access
this window, click the
EPSON Spool
Manager4
icon in the EPSON folder
(Windows 95) or double-click this icon
in the EPSON program group
(Windows 3.1), and select
Setup
from
the Queue menu.
Your computer system’s
memory is too small to
handle the volume of data in
your document.
Try reducing the image resolution of
your document in your image-editing
software.
Install more memory in your computer
if you can.
Select lower resolution or less colors
for your display setting as described
below.
For Windows 95, choose a lower
resolution setting as the Color Palette
setting. To access the Color Palette,
click
Start
, point to
Settings
, and
choose
Control Panel
. Then
double-click the
Display
icon and click
the
Settings
tab. For detailed
information on making this setting, see
your Windows 95 user’s guide.
L
Fiji2 Ref. Guide
Rev.b
A5 size Chapter 8
05-29-97 DR, pass 0
8-10
Troubleshooting
To Next Page
Loading...
Need help?
General