6-2
Setting Up Your Printer on a Network
For Windows 95 and 98 Users
This section tells you how to set up your printer so that other
computers on the network can use it.
First, you need to set up the printer as a shared printer on the
computer to which the printer is connected. Then, you must
specify the network path to the printer from each computer that
will use it, and install the printer software on those computers.
Note:
This section describes how to use your printer as a shared printer on a
network. To connect your printer directly to a network without setting
it up as a shared printer, consult your network administrator.
Setting up your printer as a shared printer
Follow these steps to share a printer connected directly to your
computer with other computers on a network.
1. Click Start,pointtoSettings, then click Control Panel.
2. Double-click Network.
3. Click the File and Print Sharing button.
4. Select the Iwanttobeabletoallowotherstoprinttomy
printer(s) check box and click OK.
To Next Page
Loading...
Need help?
General