1-8
Paper Handling
❏ Loadthepaperprintablesideupwiththeperforatedmargins
positioned as shown in the illustration.
❏ Use flat, undamaged paper. If the paper or the support sheet
is curled, flatten it before loading to avoid paper feeding
problems.
❏ Always place the included support sheet under the stack of
Photo Paper, but do not print on it.
❏ You can load up to 20 sheets of 4 × 6 inch Photo Paper or one
sheet of 200 × 300 mm Photo Paper into the sheet feeder.
❏ Do not fold the paper before printing.
❏ Cutortearthepaperattheperforationonlyafterprinting.
❏ Select Photo Paper as the Media Type setting and Photo
Paper 4 × 6inor Photo Paper 200 × 300 mm as the Paper
Size setting in your printer driver.
Removing the perforated margins
Note the following when removing the perforated margins.
loading position
To Next Page
Loading...
Need help?
General