Troubleshooting
9-15
For Macintosh, check the settings in the Page Setup dialog
box. Make sure the settings are appropriate for the paper size
you are using.
Inverted image
Turn off the Flip Horizontal setting in the printer driver, or the
“Mirror” setting in your application software. For instructions,
see the online help for the printer driver or for your application.
For Macintosh, see also “Using the Advanced settings” on page
4-9.
Blank pages print
Try one or more of these solutions:
❏ Select your printer as the default printer in Windows.
❏ For Windows, check the settings in the Paper dialog box.
Make sure they are appropriate for the paper size you are
using.
For Macintosh, check the settings in the Page Setup dialog
box. Make sure they are appropriate for the paper size you
are using.
❏ Run the Head Cleaning utility to clear any clogged nozzles.
After tryingone or more of these solutions, run a printer operation
check to check your results. See “Running a printer operation
check” on page 9-5 for details.
Printout has smears on the bottom edge
Try one or more of these solutions:
To Next Page
Loading...
Need help?
General