8-8
Maintenance
If the print quality still has not improved, one or both of your ink
cartridges may be old or damaged and may need to be replaced.
To replace an ink cartridge, see “Replacing an Empty Ink
Cartridge” on page 7-2.
If print quality remains a problem after replacing the ink
cartridges, contact your dealer.
Note:
To maintain print quality, we recommend turning on the printer for at
least one minute every month.
Using the control panel buttons
Follow the steps below to clean the print head using the control
panel buttons.
1. Make sure that the
P power light is on and that both the
B
black and
A colorinkoutlightsareoff.
Note:
If the
B black or
A color ink out light is flashing or on, you cannot
clean the head.
2. Hold down the
R
cleaning button for three seconds.
To Next Page
Loading...
Need help?
General