Using the Printer Software for Macintosh
4-23
4. If you are satisfied with the previewed image, click Print.
If you are not satisfied with the appearance of the image, click
Cancel. The Preview and Print dialog boxes close with the
current print settings preserved. Open the Print dialog box
again to make additional changes to the print settings.
Saving print settings in files
You can save the print settings in a file by using the Save File
icon button in the Print dialog box. This feature lets you print the
document using the saved print settings at a later time simply by
double-clicking the saved file. Follow these steps.
Note:
Use the Preview icon button to switch between the Print,
Preview, and Save File modes. Click the icon to select the mode
you want.
1. Make your printer driver settings.
2. Click the Preview icon button in the Print dialog box
repeatedly until the Print button changes into the Save File
button.
3. Click the Save File button. The following dialog box appears.
4. Select the location where you want to save the file, then type
afilenameintotheSaveAsboxandclickSave.
To Next Page
Loading...
Need help?
General