9-16
Troubleshooting
❏ If the paper is curled toward the printable side, flatten it or
curl it slightly toward the opposite side.
❏ Settheadjustlevertothe“+” position, and turn off the High
Speed setting in your printer driver’s Advanced dialog box.
The Advanced dialog box is accessible through the Main
menu (for Windows) or Print dialog box (for Macintosh)
when Custom is selected as the Mode setting. To turn this
option off, you may also need to change the Print Quality
setting.
Printing is too slow
Try one or more of these solutions:
❏ Make sure the Media Type setting in your printer driver is
correct. For instructions, see “Making theMediaType setting”
on page 2-5 for Windows or “Making the Media Type setting”
on page 4-3 for Macintosh.
❏ Select Automaticas the Mode setting on your printer driver’s
Main menu (Windows) or in the Print dialog box (Macintosh)
and then move the slider to Speed.Forinstructions,see
“Using the Automatic mode” on page 2-8 for Windows or
“Using the Automatic mode” on page 4-6 for Macintosh.
❏ Close any applications you are not using at the moment.
❏ If you upgraded from Windows 95 to Windows 98, uninstall
the printer software using Add/Remove Programs in the
Control Panel in Windows, then install the software again.
Printer Doesn't Print
If one of the following error indications is displayed, try the
solutions listed.
To Next Page
Loading...
Need help?
General