B-10
Printer Specifications
System Requirements
For PCs
To use your printer, you need Microsoft
®
Windows
®
95,
Windows
®
98, or Windows
®
NT 4.0 installed and a shielded,
twisted-pair parallel cable connected. If you want to connect your
printer to a USB port, you need a Windows 98 pre-installed PC
equipped with a USB port and a shielded USB cable connected.
Your computer should also meet the following system
requirements.
Your computer dealer can help you update your system if it does
not meet these requirements.
For Macintosh computers
To connect this printer to Apple
®
Macintosh
®
computers, you
must use a USB cable.
Minimum System Requirements Recommended System
i486/25 MHz for Windows 95 and NT 4.0
i486/66 MHz for Windows 98
Pentium or higher processor
16 MB RAM 32 MB RAM or more for
Windows 95 and 98
64 MB or more for Windows
NT 4.0
20 MB hard disk space for Windows 95
and 98
40 MB for Windows NT 4.0
50 MB or more hard disk
space for Windows 95 and
98
100 MB or more for Windows
NT 4.0
VGA monitor VGA or better monitor
To Next Page
Loading...
