Troubleshooting
9-17
❏ All lights are off
❏ Lights came on and then went out
❏ Only the power light is on
❏ The S paperoutlightisflashingoron
❏ One of the ink out lights is flashing or on
❏ Ink out lights are on and the other lights are flashing
All lights are off
Try one or more of these solutions:
❏ Press the
P power button and make sure the printer is on.
❏ Turn off the printer and make sure the power cord is securely
plugged in.
❏ Make sure your outlet works and is not controlled by a wall
switch or timer.
Lights came on and then went out
The printer’s voltage may not match the outlet rating. Turn off the
printer and unplug it immediately. Then, check the printer labels.
If the voltage does not match, DO NOT PLUG YOUR PRINTER
BACK IN. Contact your dealer.
Only the power light is on
Try one or more of these solutions:
To Next Page
Loading...
Need help?
General