Setting Up Your Printer on a Network
6-5
6. Double-click the icon of the computer that is directly
connected to the printer. Then click the printer’sicon.
7. Click OK and follow the messages on the screen.
For Windows NT 4.0 Users
This section tells you how to set up your printer so that other
computers on the network can use it.
Note:
This section is written for small network users only. If you are on a large
network and would like to share your printer, consult your network
administrator.
First, you need to set up the printer as a shared printer on the
computer to which the printer is connected. Then, you must
specify the network path to the printer from each computer that
will use it, and install the printer software on those computers.
To Next Page
Loading...
