Replacing Ink Cartridges
7-3
c
Caution:
❏ EPSON recommends the use of genuine EPSON ink
cartridges. Other products not manufactured by EPSON
may cause damage to your printer not covered by EPSON's
warranties.
❏ Leave the old cartridge installed in the printer until you have
obtained a replacement. Otherwise, ink remaining in the
print head nozzles may dry out.
Note:
❏ You cannot continue printing with one ink cartridge empty, even if
the other cartridge still contains ink. Before printing, replace the
empty cartridge.
❏ In addition to the ink used during document printing, ink is
consumed during the print head cleaning operation and during the
self-cleaning cycle which is performed when the printer is turned on.
To replace an ink cartridge using the printer’s control panel,
follow the steps below.
1. Make sure the printer is on. The
P power light should be on,
but not flashing. (Determine which cartridge needs to be
replaced as indicated by the
B black and
A color ink out light.)
2. Lower the output tray at the front of the printer, then open
the printer cover.
To Next Page
Loading...
Need help?
General